Function xensiv_pas_gas_clear_measurement_status(const xensiv_pas_gas_t *, uint8_t)

• Defined in File xensiv_pas_gas.h

Function Documentation

int32_t xensiv_pas_gas_clear_measurement_status(const xensiv_pas_gas_t *dev, uint8_t mask)

Clears the measurement status of the sensor device.

Parameters:

• dev – [in] Pointer to the XENSIV™ PAS GAS sensor device

• mask – [in] ORed combination of the following values:

  • XENSIV_PAS_GAS_REG_MEAS_STS_INT_STS_CLR_MSK Clears the sticky bit MEAS_STS.INT_STS and forces the INT pin to inactive level

  • XENSIV_PAS_GAS_REG_MEAS_STS_ALARM_CLR_MSK Clears the sticky bit MEAS_STS.ALARM

Returns:

XENSIV_PAS_GAS_OK if clearing the measurement status selected bits was successful; an error indicating what went wrong otherwise